Seat pans and the subframe connector

Subframe connectors installed!

The replacement floor brace, is wider than the factory units, so I had to weld an extra block of 3/16 plate steel on the end of the subframe connector that inserts into the floor brace.  This made for a good tight fit, and made welding easier.  Otherwise the subframe connector install followed the passenger side.  If you want all the details, […]

» Read more

Installing the Driver side Front Torque Box, and Floor pan brace

Using Clecos to hold in place

The driver’s side turned out to be a bigger job than the passenger side.  At least for the passenger side I had the frame rail and floor pan brace as a guide to fit the torque box.  But I’m getting ahead of myself.  Lets start with the floor brace… The floor braces don’t come with holes for the e-brake cables, […]

» Read more
1 2